Picture |
Heading |
Updated |
|
7pcs Fillet Welding Gauge
There are two types of fillet welding gauge
Metric &Inch , one end is metric , the other end is inch
Inch. Both end are inch
China manufacturer
Part No:WG-211
Manufacturer: Rok International Industry Co., Limited
How to use the gauge... |
2017-12-28 |
|
China Bridge Cam welding Gauge WG-208
Measurements if possible in either inches or millimeters
General Linear Measurements up to 50mm ( 2" )
Angle of preparation (0°~60°)
excess weld metal
Depth of undercut
Al in one gauge for measuring Undercut, Excess
material, Filets, Preparatio... |
2017-12-10 |
|
Automaticl Weld Size Welding Gauge from China
Automaticl Weld Size Welding Gauge from China
Art No. WG-502
Manufactured by Rok International Industry Co., Limited.
For Accurate Calibration of Butt Fillet Type WeldsThe AWS Weld Gauge is for accurate calibration of butt and fillet type welds. ... |
2017-12-09 |
|
Spherical Electronic Digital Tube Micrometer auto power off
Spherical Electronic Digital Tube Micrometer auto power off
Part No. DM-01B
Designed to measure the wall thickness of various tubing. The Tube Micrometers have two combinations of measuring faces (carbide tipped): spherical-flat type, and spherical... |
2017-12-07 |
|
Rok HJC40 Universal welding gauge fro undercut
Rok HJC40 Universal welding gauge fro undercut, with locking screw
Part No: WG-401
Brand: ROKTOOLS
Measure all welding geometry parameters with one tool!
The highest quality welding gauge available.
Made from heavy duty stainless steel
Pr... |
2017-11-24 |
|
tailess Steel Sector weld gauge WG-505 with mangnifier
Part No: WG-505
Material: Stainless Steel:
With three Units, suitable to different country.
Brand: ROKTOOLS... |
2017-10-26 |
|
0-25mm Top quality Digital Micrometer(outside)
China Top Quality digital Outside MICROMETER
Part No: DM-01A 0-25mm, DM-11A 25-50mm, DM-21A 50-75mm, DM-31A 75-100mm
Economical but high quality. Range 0-25 mm Resolution 0.001mm Accuracy +/- 0.002 mm Nominal throat depth 20mm Large 14mm LCD... |
2017-10-23 |
|
0.4-0.9mm thick Blade Micrometer 25-50mm
0.4-0.9mm thick Blade Micrometer 25-50mm
Range: 0-25mm 25-50mm,
High Accuracy Top quality Blade micrometer
The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach portions
With ratche... |
2017-10-11 |